Aeco Home page logo
Versione Italiana English Version Español

ATEX-IECEx PRODUCTS

NAMUR INDUCTIVE SENSORS 1-2-3 G/D

Namur Inductive Sensors 1-2-3 G/D

These are inductive sensors sensible to metallic materials. Two-wire non amplified D.C. sensors which contain only the oscillator and are adapted to control an electronic amplified thereshold circuit. They are ATEX certified according to Directive2014/34/EU. Such devices can be utilised in hazardous areas, where Gas and Air are present in the atmosphere, or Dust and Air, consistent with group II classification, categories 1G/D-2G/D or 3G/D. 

INDUCTIVE SENSORS 3D

Inductive Sensors 3D

These are inductive sensors sensible to metals and amplified D.C. or A.C. in the M12-M18-M30 versions.
These sensors are part of the ATEX series, have a built-in device that interrupts irreversibly  its functionality when norm limit temperature >+75°C has been exceeded in rigorous respect of values indicated on product label. Such a solution makes the device “safer” in potentially explosive environment.

 

CAPACITIVE SENSORS 3D

Capacitive Sensors 3D

These are capacitive sensors sensible to all materials and amplified D.C. or A.C. in the M18 and M30 versions.
These sensors are part of the ATEX series, have a built-in device that interrupts irreversibly  its functionality when norm limit temperature  >+75°C has beenexceeded in rigorous respect of values indicated on product label.
Such a solution makes the device “safer” in potentially explosive environment.

 

MAGNETIC REED SENSORS 1-2-3 G/D

Magnetic Reed Sensors 1-2-3 G/D

These are 2-wire magnetic switches metallic housing version made of reed contacts held in a glass bulb.
They come in a cylindrical housing, continuous voltage and normally open contact. They are CE approved according to the CE Certification, Atex approved according to Directive 2014/34/EU ATEX, they are also CoC approved according to International Certification IECEx. They can be used in potentially explosive environments with the presence of Air/Gas and Air/Dust mixtures. Type of protection used against explosion: "m" (encapsulation).

SENSORS FOR ROTATION CONTROL 3D

Sensors for Rotation Control 3D

Devices that control velocity decreases in a rotating unit  and function by means of inductive metal detectin and are supplied in cilindrical metalling housing M30.
The ATEX series of this sensors is equipped  with a built-in device that interrupts irreversibly  its functionality when norm limit temperature  >+75°C has beenexceeded in rigorous respect of values indicated on product label. Such a solution makes the device “safer” in potentially explosive environment. 

ROTATIVE LEVEL CONTROLS 1/2D

Rotative Level Controls 1/2D

They are used for the level control in containers holding product in powder or granule form in potentially explosive environment  in Category 1/2 dusty environments D (zone 20/21). The functioning is based on the slow rotation of a syncronous motor which turns the paddle which is placed in the container that wheel or is stopped according to the absence or presence of material.
 

INTRINSIC SAFETY ATEX BARRIERS

Intrinsic Safety Atex Barriers

DIN mounting equipment that offers the easiest and most efficient way implement fail safe security in hazardous application areas. It offers the possibility to house 176 channels in only a one meter long DIN rail.
High velocity signal repetition accuracy. Led power, signal status and line failure indicator.
ATEX Gas-Dust fail safe according to 2014/34/EU norm.